Aquael Pond Pump AQUAJET PFN

The pumps AQUAJET PFN 500, PFN 1000, PFN 1500 and PFN 2000, as well as the high-performance garden pump PFN 3500, are designed for pumping and filtering water in fountains, cascades, ornamental ponds, garden ponds and swimming pools.

They can also be used in other operating environments, e.g. in the garden, in the household, in agriculture, in animal and fish breeding, in the construction industry etc. Thanks to their compact size, their high efficiency, the adjustable pump capacity and above all the simple construction AQUAJET PFN pumps are versatile, effective, durable and easy to use.

The pump can be used in swimming pools as long as nobody is in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 ° C. The AQUAJET PFN 1000, PFN 1500 and PFN 2000 models can be operated in salt water. The AQUAJET PFN 500 model is designed for indoor use.

The AQUAJET PFN pump series is characterised by a very high degree of efficiency in relation to its performance. This is due to the use of modern, energy-efficient motors and high-quality seals under the rotor chamber, which reduces the yield losses to a minimum. In addition, the latter solution allows the pumps to work out of the water (they are completely sealed) and increases the height of the water level so that AQUAJET PFN pumps can act as circulating pumps.

All models of the AQUAJET PFN pumps are equipped with a stepless power control, which has an ergonomic button on the outlet nozzle of the pump. With the button, you can easily adjust the strength of the water jet.

Thanks to the use of ceramic rotor axes in AQUAJET-PFN pumps (except for the 500 model with steel axis), the pumps are characterised by a particularly quiet operation. A large pre-filter protects the rotor from contamination. As a result, the pumps do not need to be cleaned regularly.

AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. Cleaning the rotor slot once a month is sufficient. To avoid a drop in performance, clean the filter cartridge by flushing it with water from the pond. The use of pond water does not destroy the bacterial flora in the sponge and thus enables the efficiency of the biological filtration to be maintained. The frequency of cartridge flushing depends on the degree of water pollution and should be performed if a noticeable decrease in performance is observed.

AQUAJET PFN pumps are manufactured in accordance with the currently binding safety standards. The pump may only be connected to the mains via a protected socket. The socket-outlet must be in a dry place. Before any maintenance work (e.g. assembly or cleaning), pull the plug out of the socket.