Milwaukee MW803 pH/EC/TDS/°C Measuring Device
4-in-1 meter
€ 159,99
(Price shown includes 20% VAT. - Excludes delivery costs)
Features & Advantages
- Especially for aquaculture
- 3 parameters & temperature measurement
- Easy to use & high accuracy
- Lightweight & low maintenance
Item no.: MWK-114003, Content: 1 Pc, EAN: 5999567670120
Frequently bought together with Water Conditioner - Freshwater & Saltwater
Description
This precise and multi-purpose device by Milwaukee is a 4-in-1 tester that was specially developed for farmers to determine precise measurements required for aquaculture quickly and easily. The following control parameters can be measured with the MW803 pH/EC/TDS/°C device: pH value, EC value, TDS value (conductivity values) and the water temperature.
Features:
- Accuracy of ±0.05 pH, EC/TDS to 2% of full scale and ±0.5°C / ±1°F for temperature
- Automatic calibration including 5 saved calibration points, higher accuracy compared to manual calibration
- Replaceable dual-port pH probe increases service life
- Exposed temperature probe for rapid temperature compensation
- Fully waterproof to IP65
- Lightweight at 3.5 ounces, portable and easy to carry
- Easy to read results with large digital dual LCD display including stability indicator and hold function
- Extreme accuracy of ±0.05 pH, EC/TDS 2% full scale and temperature ±0.5 C / ±1 F
- Range 0.00 - 14.00 pH | EC 0 to 3999 µS/cm | TDS 0 - 2000ppm | Temperature: 0.0 to 50.0 C / 32.0 to 122.0 F
- Gel-filled pH electrode with dual junction for low maintenance
- High performance thanks to the exposed temperature sensor for quick readings
- Fully waterproof to IP65
- Automatically shuts off after 8 minutes of non-use
- Automatic 1 or 2 point pH calibration with 5 stored calibration points and easy 1 point EC calibration
Manufacturer's instructions for use and care: All pH sensors have a limited lifespan; the reaction times become longer with time. Proper care can however increase its lifespan and will maintain measurement accuracy. Milwaukee also offers a pH Maintenance Kit for professional cleaning and maintenance. Here are a few tips from the manufacturer:
1. Always store cap with Buffer or Storage Solution MA9015. Never in water.
2. Clean the tester regularly by immersing the device in cleaning solution MA9016.
3. After cleaning and/or storage, calibrate the device BEFORE testing to compensate for changes in the pH sensor.
4. Always stir the tester gently in the sample for a faster result.
For more information on how to use, please click on the PDF below.
| Brands (Manufacturers): | Milwaukee |
|---|
