Aqua Rebell Glass Inflow Cut
Made of high-quality glass
The Aqua Rebell Glass Inflow Cut is a filter inlet that is connected to the external filter and that draws in the aquarium water. It consists of high-quality borosilicate glass in laboratory quality.
The Aqua Rebell Glass Inflow Cut is carefully and artfully made by hand. This makes each piece unique.
Despite its high quality, this filter inlet is not expensive - we paid attention to that. The glass is practically invisible in the water so that the filter inlet does not optically distract from the aquarium equipment and the aquarium inhabitants.
The Aqua Rebell Glass Inflow Cut is a filter inlet that is particularly suitable for use in aquariums with a cover. The recesses in the lid that are provided for these devices are often not particularly spacious, and it can be difficult to carry out the usual curved glassware here. With the Aqua Rebell Glass Inflow Cut, there is now an ideal solution for this kind of aquarium. Simply connect its straight hose connection with a suitable flexible hose or with existing piping. The Aqua Rebell Glass Inflow Cut consists only of the straight glass part that protrudes into the water.
The inlet slots are located in the lower part of the inflow, they are carefully worked and visually unobtrusive. If you have particularly small aquarium animals, such as young shrimp or baby fish, we recommend a filter guard, which effectively protects the smallest inhabitants from being sucked in.
|Aqua Rebell Glass Inflow Cut - 13 mm|
|Suitable for hoses||13 mm or 12/16 mm|
|Aqua Rebell Glass Inflow Cut - 17 mm|
|Suitable for hoses||17 mm or 16/22 mm|
Our expert Oliver Knott recommends:
The Aqua Rebell Glass Inflow Cut is an ideal solution if you want to use glassware in your aquarium with a cover and the cutouts do not give you enough space for curved glass tubes.
|Brands (Manufacturers):||Aqua Rebell|